Fe3O4 – Glutathione stabilized Ag nanoparticles: A new magnetically separable robust and facile catalyst for aqueous phase reduction of nitroarenes

The heterostructured Ag nanoparticles decorated Fe₃O₄ Glutathione (Fe₃O₄‐Glu‐Ag) nanoparticles (NPs) were synthesized by sonicating glutathione (Glu) with magnetite and further surface immobilization of silver NPs on it. The ensuing magnetic nano catalyst is well characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA). The prepared Fe₃O₄‐Glu‐Ag nanoparticles have proved to be an efficient and recyclable nanocatalyst with low catalyst loading for the reduction of nitroarenes and heteronitroarenes to respective amines in the presence of NaBH₄ using water as a green solvent which could be easily separated at the end of a reaction using an external magnet and can be recycled up to 5 runs without any significant loss in catalytic activity. Gram scale study for the reduction of 4‐NP has also being carried out successfully and it has been observed that this method can serve as an efficient protocol for reduction of nitroarenes on industrial level.     

Syntheses of chiral fused 4,5-diazafluorene–bis(nopinane) derivatives

1. Download : Download high-res image (122KB)
2. Download : Download full-size image

     

Mechanistic studies on the reaction between glutathionylcobalamin and selenocysteine

Abstract

The reaction between glutathionylcobalamin (GSCbl), a complex of Co(III)-cobalamin with glutathione, and selenocysteine (Sec) was investigated using ultraviolet-visible (UV–vis) spectroscopy. The interaction results in the formation of cob(II)alamin and proceeds via two pathways: (i) a rapid formation of complex between GSCbl and Sec followed by the rate-determining substitution of glutathionyl-ligand by Sec and rapid electron-transfer from Se-atom to Co(III)-ion and (ii) a nucleophilic attack of Co(III)-S bond by Sec.     

Oxidative dehydrogenation of n-octane over a vanadium–magnesium oxide catalyst: Influence of the gas hourly space velocity

Oxidative dehydrogenation (ODH) of n-octane was carried out over a vanadium–magnesium oxide catalyst in a continuous flow fixed bed reactor. The catalyst was characterized by ICP–OES, powder XRD and SEM. The catalytic tests were carried out at different gas hourly space velocities (GHSVs), viz. 4000, 6000, 8000, and 10,000 h^?1. The best selectivity for octenes was obtained at the GHSV of 8000 h^?1, while that for C8 aromatics was attained at the GHSV of 6000 h^?1 at high temperatures (500 and 550 °C). The catalytic testing at the GHSV of 10,000 h^?1 showed the lowest activity, while that at the GHSV of 4000 h^?1 consistently showed the lowest ODH selectivity. Generally, the best ODH performance was obtained by the catalytic testing at the GHSVs of 6000 and 8000 h^?1. No phasic changes were observed after the catalytic testing.     

New strategy for reversal tolerant anode for automotive polymer electrolyte fuel cell

New approach for the reversal tolerant anode for polymer electrolyte membrane fuel cell is suggested by using the multifunctional IrRu alloy catalyst having concurrent superior activities towards hydrogen oxidation reaction and oxygen evolution reaction to mitigate the degradation of anode under the fuel starvation condition.     

甲烷-二氧化碳重整制合成气与现代分析技术应用于探究性化工专业实验的设计与探索

以甲烷-二氧化碳重整制合成气为实例，设计探究性实验，将合成气的制备和现代分析技术应用于化工专业实验的教学实践中以提高学生的创新和实践能力。实验包括催化剂的制备，催化剂的性能评价和催化剂的表征等3大部分。采用工业最常用的浸渍法制备含有不同助剂的Ni/X/γ-Al2O3（X为Co，Fe，MgO，CeO2）催化剂，以甲烷-二氧化碳重整反应评价其催化性能，并采用XRD、H2-TPR、BET和TG对催化剂的微观结构进行表征。结合催化剂的性能评价结果和表征结果，探讨不同助剂对镍基催化剂性能的改善效果及机制。通过开设该实验，可以让学生了解化工学科的前沿知识以及现代分析技术的基本原理和用途，掌握专业的实验操作、数据处理和谱图绘制方法，提高学生的专业素养和综合能力。     

Catalytic activity of nanocrystalline ZnM2O4 (M = Fe,Co) prepared via simple and facile synthesis of thermal decomposition of mixed metal complexes of Schiff bases generated from α-ketobutyric acid and diaminoguanidine

Metal complexes ([ML₂], where M = Fe, Co, or Zn; HL = 2-[(6-ethyl-5-oxo-4,5-dihydro-2H-[1,2,4]triazin-3-ylidene)-hydrazono]-butyric acid, C₉H₁₃N₅O₃) of a Schiff base derived from α-ketobutyric acid (α-KBA) and diaminoguanidine (Damgu) were synthesized and characterized using elemental, spectral, and thermal studies. The metal complexes exhibited similar decomposition behavior, with a highly exothermic final decomposition step resulting in the formation of metal oxides. Isomorphism among the complexes was revealed using a powder X-ray diffraction (PXRD) technique. Solid solution precursors ([Zn_1/3M_2/3(L)₂], where M = Fe, Co) were synthesized and characterized using various physico-chemical techniques. A thermal decomposition technique was used to prepare spinel-type zinc cobaltite (ZnCo₂O₄) and zinc ferrite (ZnFe₂O₄) nanocrystalline particles with the synthesized single source precursors. Structural studies using PXRD ascertained the predominant crystal phase to be spinel. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) showed a mean nanoparticle size of 18 ± 2 nm. Magnetic measurements revealed a weak magnetic behavior in the synthesized spinels. In the aqueous phase, the spinels exhibited catalytic activity, reducing 4-nitrophenol (4-NP) in the presence of NaBH₄ at room temperature. Additionally, the study demonstrated that the catalyst can be recovered and reused for five cycles with a more than 85% conversion efficiency.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

A priori bounds and multiplicity for fully nonlinear equations with quadratic growth in the gradient

We consider fully nonlinear uniformly elliptic equations with quadratic growth in the gradient, such as

$?F(x,u,Du,D^{2}u)=\lambda c(x)u+〈M(x)Du,Du〉+h(x)$

in a bounded domain with a Dirichlet boundary condition; here $\lambda \in \mathbb{R}$, $c,h\in L^p(\mathrm{\Omega })$, $p>n\ge 1$, $c?0$ and the matrix M satisfies $0<{\mu }_{1}I\le M\le {\mu }_{2}I$. Recently this problem was studied in the “coercive” case $\lambda c\le 0$, where uniqueness of solutions can be expected; and it was conjectured that the solution set is more complex for noncoercive equations. This conjecture was verified in 2015 by Arcoya, de Coster, Jeanjean and Tanaka for equations in divergence form, by exploiting the integral formulation of the problem. Here we show that similar phenomena occur for general, even fully nonlinear, equations in nondivergence form. We use different techniques based on the maximum principle.We develop a new method to obtain the crucial uniform a priori bounds, which permit to us to use degree theory. This method is based on basic regularity estimates such as half-Harnack inequalities, and on a Vázquez type strong maximum principle for our kind of equations.